National Lockers and Shelving

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Quality Used Lockers for Rent or Sale
National Lockers and Shelving Navigation National Lockers and Shelving Home Page About National Lockers and Shelving National Lockers and Shelving Products National Lockers and Shelving Services Request a Quote or Catalog from National Lockers and Shelving Contact National Lockers and Shelving National Lockers and Shelving Home Page About National Lockers and Shelving National Lockers and Shelving Products National Lockers and Shelving Services Request a Quote or Catalog from National Lockers and Shelving Contact National Lockers and Shelving National Lockers and Shelving Home Page About National Lockers and Shelving National Lockers and Shelving Products National Lockers and Shelving Services Request a Quote or Catalog from National Lockers and Shelving Contact National Lockers and Shelving Documents

Lockers Secaucus NJ

locker in Secaucus NJ is a small, usually narrow storage compartment. They are commonly found in dedicated cabinets, very often in large numbers, in various public places such as locker roomsworkplacesmiddle and high schoolstransport huband the like. They vary in size, purpose, construction, and security.

Secaucus NJ Lockers are normally quite narrow, of varying heights and tier arrangements. Width and depth usually conform to standard measurements, although non-standard sizes are occasionally found. Public places with lockers often contain large numbers of them, such as in a school. They are usually made of painted sheet metal which are known as lockers

The characteristics that usually distinguish them from other types of cabinet or cupboard or storage container in Secaucus NJ are:

  • They are usually equipped with a lock, or at least a facility for padlocking (occasionally both).
  • They are usually intended for use in public places, and intended for the short- or long-term private use of individuals for storing clothing or other personal items. Users may rent a locker for a single use or for a period of time for repeated use. Some lockers are offered as a free service to people partaking of certain activities that require the safekeeping of personal items.
  • There are usually but not always several of them joined together.

Lockers are usually physically joined together side by side in banks, and are commonly made from steel, although woodlaminate, and plastic are other materials sometimes found. Steel lockers which are banked together share side walls, and are constructed by starting with a complete locker; further lockers may then be adding by constructing the floor, roof, rear wall, door, and just one extra side wall, the existing side wall of the previous locker serving as the other side wall of the new one. The walls, floors, and roof of lockers may be either riveted together (the more traditional method) or, more recently, welded together.

Locker doors usually have some kind of ventilation to provide for the flow of air to aid in cleanliness. These vents usually take the form of a series of horizontal angled slats at the top and bottom of the door, although sometimes parallel rows of small square or rectangular holes are found instead, running up and down the door. Less often, the side or rear walls may also have similar ventilation.

Locker doors in Secaucus NJ usually have door stiffeners fixed vertically to the inside of the door, in the form of a metal plate welded to the inner surface, and protruding outward a fraction of an inch, thus adding to the robustness of the door and making it harder to force open.

Lockers are often manufactured by the same companies who produce filing cabinetsstationery cabinets (occasionally wrongly referred to as lockers, steel shelving, and other products made from sheet steel.

Quick Ship Lockers Secaucus NJ

Secaucus NJ Metal lockers are the most common locker in the industry due to its durability and flexibility. All steel construction allows you to customize your storage needs without breaking the bank. Stainless steel is both practical and stylish. Add a high end look to your break room or use them in wet or corrosive areas, either way they stainless steel lockers will perform beautifully.

Solid plastic lockers are great for wet or corrosive environments where other lockers won’t hold up. Great for Secaucus NJ swimming pools, water parks or anywhere there is water or corrosive materials!

Our Secaucus NJ wood lockers come in a variety of wood grains, stains and door styles to accommodate any decorating style. The possibilities are endless! Phenolic lockers are the most durable lockers on the market today! Solid phenolic has a unique non-porous surface, frameless doors, stainless steel hinges and a large variety of colors and patterns! There are also completely different types of doorless locker design, such as one that is cylindrical in shape rather than rectangular. One such design eliminates the use of doors by offering a cylinder open at the front: you place your items in, then rotate the cylinder into the housing, which turns the opening away, and secures the contents.

Electronic Lockers Secaucus NJ

We spent years developing a system that is unmatched in its capabilities by any other product in Secaucus NJ. We offer electronic lockers that are contemporary looking and compliment each venue's style and ambiance.

Our design adds to the appearance of your facility, enhancing the image that you want to project to your clientele. While many vending products detract from your overall image, National Lockers adds to it.

The lockers operate on a "closed door basis", meaning that all doors are locked until a customer pays to open one. There is an onsite and a remote "lock down" and "open all" capability; which adds to the overall security of your venue.

Unlike our competitors who merely offer a readily available off-the-shelf product manufactured by someone else, or technologies designed for other industries, our product was conceived from the very start to be the ultimate locker system for both your guests and your operations.

We can customize any type of Secaucus NJ locker solution to fit your needs. We also pride ourselves on outstanding customer service and satisfaction. We regularly service and collect from all of our sites based on schedules that reflect seasonality, usage, and customer needs.

Our electronic lockers reduce labor by utilizing self serve kiosks and proactive event notification.  Our keypad on every door significantly improves the guest experience by reducing guest queuing.  American Locker is more secure than the competition due to our proprietary security features.

Our all weather kiosks allow the placement of lockers in areas that the competition just can't go.

Inquire about our all new electronic cell phone charging lockers which allow guests to securely store their  

Our Secaucus NJ electronic lockers are available for purchase, lease or concession.

Special Purpose Lockers Secaucus NJ

There are a number of less standard lockers that are offered by various Secaucus NJ manufacturers. These include:

  • Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers.
  • Bicycle lockers are usually in outdoor locations near railway stations and the like where people may want to store bicycles securely. They are often banked together, with individual lockers shaped like an isosceles triangle for efficient and compact storage of a bicycle. This triangular shape permits the lockers to be grouped either in a radial pattern (with the sharpest points of the lockers together), or in a row in alternating orientations.
  • Heavy-duty or high-security lockers are similar to the standard models, but are usually made from thicker steel, and have three-point locking, regardless of the number of tiers involved. Some models are made from steel 1.2 mm. thick, in contrast to the more usual 0.8 mm.
  • Laundry lockers are used in places like hospitals and food-processing workplaces where uniforms have to be collected, laundered, then returned to their owners. The locker cabinet contains a number of very narrow lockers, each of whose doors is keyed using a key held by the owner, so that they have access only to their own locker; but the entire array of doors is embedded in a much larger door covering the entire front of the cabinet. Opening this opens all the lockers simultaneously, and requires the use of a master key which is held by whoever collects items deposited in lockers, for laundering, then returned in the same way, after which they items are accessible to owners using their individual small doors.
  • Services lockers are extra-wide lockers used by fire or police services, and typically have a number of different compartments within a single door to accommodate different pieces of equipment used by fire or police personnel, such as special shelves to accommodate helmets, boots, and so on.
  • School lockers may be single- or two-tier, and are fitted with internal divisions or shelves to accommodate both hanging space and room for storing textbooks.
  • Perforated lockers are similar to the standard types of locker, but the door and walls are made largely or entirely of perforated steel, with hundreds of holes creating a strong mesh arranged in a diagonal pattern. This is used where good ventilation is required, or where, for security reasons, it is necessary that the contents can be examined visually while the doors are locked.
  • Clean/dirty lockers normally have two or three parts within the locker. One part is meant for dirty or clothes that are worn, and the other side for clean clothes. These lockers are meant for hospitals or other medical workplaces where it is useful to keep work and personal clothes apart to reduce the risk of infection. These lockers are also useful for factories where work clothes can become dirty and it can be very useful to keep them apart from personal clothes.
  • Backpacker lockers are designed to accommodate backpacks in places like backpackers' hostels, and are similar to two-tier lockers, but with larger dimensions. Typically, the height may be standard, but the width and depth will be several inches bigger. These usually lack internal fitting such as shelves, hanging railes, or hooks.
  • Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.
  • Executive lockers are larger units, not banked but free-standing, that include several compartments, including a full wardrobe-type hanging compartment, as well as a number of other smaller compartments for varied uses.
  • TA-50 military gear lockers are widely used by the US Department of Defense as personnel lockers. They can be made of several locker materials but usually are made of steel or wire mesh. The term TA-50 refers to any type of military equipment, so the sizes and configurations are generally based on the type of equipment stored.
  • Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.

Wood Lockers Secaucus NJ

Our Secaucus NJ Wood Lockers are popular with fitness gyms, country clubs, hotels, spas, raquet clubs, cruise ships, resorts, and the list goes on... These Wood Lockers are available in a wide variety of premium wood selections and several wood stain choices to provide a unique locker solution for your facility.

Wood lockers add beauty and sophistication that can't be matched by any other locker material! Our beautifully handcrafted Secaucus NJ wooden lockers are built with great attention to detail and are made to last.

Wooden, wood veneer and plastic laminate lockers offer superior Secaucus NJ craftsmanship, top quality materials, and an unlimited variety of wood finishes and laminates to accommodate any decorating style.

Wood is a hard, fibrous structural tissue found in the stems and roots of trees and other woody plants. It has been used for thousands of years for both fuel and as a construction material. It is an organic material, a natural composite of cellulose fibers (which are strong in tension) embedded in a matrix of lignin which resists compression. Wood is sometimes defined as only the secondary xylem in the stems of trees, or it is defined more broadly to include the same type of tissue elsewhere such as in the roots of trees or shrubs. In a living tree it performs a support function, enabling woody plants to grow large or to stand up by themselves. It also mediates the transfer of water and nutrients to the leaves and other growing tissues. Wood may also refer to other plant materials with comparable properties, and to material engineered from wood, or wood chips or fiber.

The Secaucus NJ Earth contains about one trillion tonnes of wood, which grows at a rate of 10 billion tonnes per year. As an abundant, carbon-neutral renewable resource, woody materials have been of intense interest as a source of renewable energy. In 1991, approximately 3.5 billion cubic meters of wood were harvested. Dominant uses were for furniture and building construction.

Plastic Lockers Secaucus NJ

Steel is the traditional Secaucus NJ material; but woodplastic, or laminate are sometimes used. Plastic or laminate lockers are sometimes advocated in environments, such as near swimming pools, where moisture accumulation may cause steel lockers to rust over time. They can also be used in external applications where internal space is not available.

Plastic Lockers are made with ½" thick impact resistant HDPE. Ventilated doors in Secaucus NJ have a secured full length continuous stainless steel hinge, which is powder coated to match the color of the locker. These lockers can withstand high-humidity applications as material will not rust, delaminate or dent. Comes with a coat hook, hat shelf, ADA compliant slam latch closure and padlock hasp.

Cubbies in Secaucus NJ are the used solution when non-locked, open storage is appropriate, such as in preschools, day care centers, churches, office supply/mail rooms, laundry rooms, and retail outlets. Kids love them because they are the right size for little hands and the right height to hang their backpacks and coats on their own. The plastic cubbies are made with ½" thick impact resistant high density polyethylene (HDPE) solid plastic, that makes them durable, resistant to scratches and dents, moistures-resistant, rustproof and never in need of painting. 

Used Lockers Secaucus NJ

We provide Secaucus NJ used lockers that are fully refurbished school or workplace liquidated lockers to the market. As schools, gyms and businesses upgrade and purchase new lockers from us we buy, remove and restore old lockers to their original condition. Our massive selection also includes reconditioned lockers that were previously damaged in shipping, manufacturer returns & clearance lockers and an impressive selection of quality NEW quick ship lockers.

We are THE source for overstock and used lockers at clearance prices and your unparralleled source for new lockers ready to ship to you from distribution centers nationwide!

We have a large warehouse bursting at the seams of every imaginable type of used locker for sale. Primarily you will find our offering to be standard metal lockers with generous selections of wood, plastic and gym lockers also available and much more.

And all of our second hand Secaucus NJ lockers undergo a multi-point inspection process to ensure they arrive ready for use, and have plenty of life left in them. Since we update our inventory daily, be sure to return often to browse our evolving selection of bargain cheap deals for surplus and discount lockers.

Lightning Lockers provides a variety of used lockers for sale, with inventory continually changing on a daily basis. If you don’t see what you need on this site, please contact us! We often have additional or recently procured used lockers for sale that are not on our website yet. Also, because Lightning Lockers buys used lockers, we often have information about the kind, size and amount of used lockers that will soon become available.  Call us today!

Lockers For Rent Secaucus NJ

Some Secaucus NJ schools in the United States have been reported to completely abolish the use of lockers. Security concerns are cited as the reason for this, with the concern being that lockers may be used to store contraband items such as weapons or drugs or pornographic material. There has been some controversy over in what circumstances school authorities or law-enforcement officials are permitted to search lockers, with or without informing the users, or with or without the users being present at the time of the search, and it has been considered a civil liberties issue, particularly in the U.S.

Other advocates of lockerless Secaucus NJ schools also cite reasons such as reducing noise by eliminating the clang of dozens of locker doors, or creating a more appealing environment aesthetically. It has also been claimed that removing lockers provides good training for students by forcing them to be more efficient in managing their books, and taking the time to plan what books they will need, and carrying only those ones.

In Secaucus NJ schools without lockers, students are sometimes provided with two complete sets of textbooks, one set being kept at school for use in class, and the other being kept at home for referring to for homework, thus limiting the amount of heavy carrying that would otherwise be required without having lockers to store them in between classes. However, research has shown an increase in the incidence of back injuries in some students, which has been directly attributed to the lack of lockers for storing books in, thus forcing students to spend more time carrying heavy loads of books in backpacks.

Some Secaucus NJ students oppose the abolition of lockers, arguing that their locker is one of the few private spaces they have in an environment which is otherwise communal and impersonal.

Coin operated Secaucus NJ public luggage lockers can be present in bus stations and rail stations. In some countries they were commonplace from the 1950s to the 1970s, but eliminated for concern that bombs may be hidden in them. Some airports have also removed them for this reason.

Steel Shelving Secaucus NJ

shelf (pl. shelves) is a flat horizontal plane which is used in a Secaucus NJ homebusinessstore, or elsewhere to hold items of value that are being displayed, stored, or offered for sale. It is raised off the ground and usually anchored/supported on its shorter length sides by brackets. It can also be held up by columns or pillars.

A Secaucus NJ shelf is also known as a counterledgemantel, or rack.

A shelf in Secaucus NJ can be attached to a wall or other vertical surface, be suspended from a ceiling, be a part of a free-standing frame unit, or it can be part of a piece of furniture such as a cabinetbookcaseentertainment center, some headboards, and so on. Usually two to six shelves make up a unit, each shelf being attached perpendicularly to the vertical or diagonal supports and positioned parallel one above the other. Free-standing shelves can be accessible from either one or both longer length sides. A shelf with a hidden internal bracket is termed a floating shelf.

The length of the shelf is based upon the space limitations of its siting and the amount of weight which it will be expected to hold. The vertical distance between the shelves is based upon the space limitations of the unit's siting and the height of the objects; adjustable shelving systems allow the vertical distance to be altered.

The front edge of the shelf under the object(s) held might be used to display the name, product number, pricing, and other information about the object(s).

The Secaucus NJ unit can be fixed or be some form of mobile shelving. The most heavy duty shelving is pallet racking.

Steel is an alloy of iron and carbon that is widely used in construction and other applications because of its hardness and tensile strength. Carbon, other elements, and inclusions within iron act as hardening agents that prevent the movement of dislocationsthat naturally exist in the iron atom crystal lattices. The carbon in typical steel alloys may contribute up to 2.1% of its weight. Varying the amount of alloying elements, their form in the steel either as solute elements, or as precipitated phases, retards the movement of those dislocations that make iron so ductile and weak, and thus controls qualities such as the hardnessductility, and tensile strength of the resulting steel. Steel's strength compared to pure iron is only possible at the expense of ductility, of which iron has an excess.

Although steel had been produced in bloomery furnaces for thousands of years, steel's use expanded extensively after more efficient production methods were devised in the 17th century for blister steel and then crucible steel. With the invention of theBessemer process in the mid-19th century, a new era of mass-produced steel began. This was followed by Siemens-Martin process and then Gilchrist-Thomas process that refined the quality of steel. With their introductions, mild steel replaced wrought iron.

Further refinements in the process, such as basic oxygen steelmaking (BOS), further lowered the cost of production, while increasing the quality of the metal and largely replaced earlier methods. Today, steel is one of the most common materials in the world, with more than 1.3 billion tons produced annually. It is a major component in buildings, infrastructure, tools, ships,automobiles, machines, appliances, and weapons. Modern steel is generally identified by various grades defined by assortedstandards organizations.

Wide Span Shelving Secaucus NJ

Wide Span serves either as an attractive sales-floor bulk merchandiser or as an efficient warehouse storage rack of hand-stacked inventory. It is often used when bulk or loads preclude the use of storage shelving. Wide Span is manufactured of heavy gauge, high-tensile steel. Wide Span is available with a number of deck and beam options to safely match what you need with your budget. It assembles quickly and has many accessories. It is available in two standard colors or finishes that match Madix's display fixtures.

Secaucus NJ Warehouse storage racks with decking provide extra space for bulky storage materials. These boltless, heavy duty racks include 5/8” thick particle board decking and assemble without tools. Racks include 3 levels that adjust at 1-1/2” increments. The 14 gauge steel uprights are 1-1/2” x 2-1/4”. Heavy duty racks have roll-formed steel framing with a chip resistant gray baked enamel finish. All models have double riveted horizontal beams for maximum frame rigidity.

Secaucus NJ Boltless, wide span storage racks include laminate decking to give you extra space for bulky materials. The laminate decking is made of sturdy 1/2” thick particleboard covered with a rugged white laminate. These storage racks have a boltless assembly with snap together components that require no nuts, bolts, clips or tools. Rack uprights are a substantial 1-1/2" x 2-1/4" x 14 gauge steel. Units feature heavy-duty roll-formed steel framing with tan or gray chip resistant baked enamel finish. All models have double riveted beams for maximum frame rigidity.

Secaucus NJ Boltless, wide span storage racks with sturdy 5/8” thick precut particle board wood decking provide valuable storage space for bulky materials. These heavy duty racks have snap together components for tool-free assembly. Uprights are a substantial 1-1/2” x 2-1/4” x 14 gauge steel. Racks include 3 levels that adjust at 1” increments and heavy-duty, roll-formed steel framing with chip resistant gray baked enamel finish. All models have double riveted horizontal beams for maximum frame rigidity.

Rivet Shelving Secaucus NJ

Rivet Shelving, also known as Rivet rack, wide span rack, double rivet shelvingdouble rivet boltless shelving, speedibilt or rivet shelving in Secaucus NJ, is becoming a very popular type of shelving or rack style. The benefits are manifest. Rivet shelving offers spans of up to 8 feet wide and depths of up to 4 feet deep. Capacities run to over 2000 pounds per level in some cases. Assembly is simple. The shelf components are put in place with the use of a rubber mallet. No nut and bolts or shelf clips required! Our rivet shelving is available with wire decking – for compliance with local fire codes where applicable , with pre cut particle board – for convenience, with steel decking – for capacity and finally – with no decking at all – for economy.

rivet is a permanent mechanical fastener. Before being installed, a rivet consists of a smooth cylindrical shaft with a head on one end. The end opposite the head is called the buck-tail. On installation the rivet is placed in a punched or drilled hole, and the tail isupset, or bucked (i.e., deformed), so that it expands to about 1.5 times the original shaft diameter, holding the rivet in place. To distinguish between the two ends of the rivet, the original head is called the factory head and the deformed end is called the shop head or buck-tail.

Because there is effectively a head on each end of an installed Secaucus NJ rivet, it can support tension loads (loads parallel to the axis of the shaft); however, it is much more capable of supporting shear loads (loads perpendicular to the axis of the shaft). Bolts and screws are better suited for tension applications.

Fastenings used in traditional wooden boat building, such as copper nails and clinch bolts, work on the same principle as the rivet but were in use long before the term rivet was introduced and, where they are remembered, are usually classified among nails and bolts respectively.

File Shelving Secaucus NJ

Archive Storage Shelving Secaucus NJ

Rivet shelving records Secaucus NJ storage systems aid in records management by providing an organized solution to high density archive storage. Multiple decking options are available for either racks or shelves. All unit box capacities are based on a standard file box size.

  • For archival shelving applications, these are outstanding shelf systems that allow access to stored file boxes from front and back
  • We can assist you on larger archival and record storage applications, including complete layout services and project management
  • Shelving can be integrated into a shelf-supported mezzanine to create high-density storage area
  • Steel box supports are available - contact us for information
  • Other types of shelving can be used in archival applications, including bulk racks, mobile aisle, and steel shelves. Although many records storage projects utilize a rivet shelving product, your application will dictate the correct storage media

Archive Storage Racks Secaucus NJ

Utilizing teardrop style pallet racks for Secaucus NJ records storage is typically for larger applications, such as archive warehouses, where many records are kept. Archive storage racks can be configured to be taller, and to essentially pack more boxes into the any particular space. They typically utilize wire decks to support storage boxes, but can utilize other decking types as needed. Racks are often used for longer term storage, or facilities where warehouse space is more available for record storage

Pallet Racks Secaucus NJ

Pallet rack is a Secaucus NJ material handling storage aid system designed to store materials on pallets (or “skids”). Although there are many varieties of pallet racking, all types allow for the storage of palletized materials in horizontal rows with multiple levels. Forklift trucks are usually an integral part of any pallet rack system as they are usually required to place the loaded pallets onto the racks for storage. Since the Second World War, pallet racks have become an essential and ubiquitous element of most modern warehouses, manufacturing facilities, retail centers, and other storage and distribution facilities.

All types of pallet racking increase storage density of the stored goods. Costs associated with the racking increases with increasing storage density. Selective rack is the least dense at a cost of about $50–$70 per pallet position up to gravity flow pallet rack which can cost $250 –$400 per pallet position.

Selective pallet racking is the most common pallet racking system in use today. Selective pallet racking systems typically come in one of two configurations: a roll formed, or clip-in configuration, and a structural bolt-together configuration.

  1. Roll formed selective rack is most commonly manufactured in a "teardrop" style (so named as the holes on the column of the upright are shaped like a teardrop). Pallets then rest on the horizontal load beams that are held in place by mounting clips. Because the clips on teardrop configurations can be quickly moved, the shelves can be easily adjusted to different heights to accommodate various load sizes. This is convenient for a warehouse that needs to store a wide variety of product sizes.
  2. Structural pallet rack systems are very similar to roll formed pallet rack systems except the horizontal load beams are attached to the uprights with bolts and have much greater weight-bearing capacity. The bolt fixings make this a form of adjustable shelving - racks can be constructed, reconfigured, and dismantled and reused as necessary.

Structural pallet racking can be designed into the structure of the Secaucus NJ building itself, so that the upright columns are simultaneously used to support the roof of the storage facility, in which case the structural pallet rack uprights replace the storage building’s vertical support I-beams. This system is a rack supported building.

Selective Secaucus NJ pallet rack systems provide easy accessibility to all products at all times - important if the inventory is rapidly depleted and restocked (called quick turnover). A selective pallet rack system is commonly used in a "big-box" distribution application, as well as in retail store inventory rooms, cold storage applications, wholesale stores, etc.

Many types of Secaucus NJ pallet storage racks are available with different designs to fulfill specific functions or create specific advantages. When deciding on the type of pallet rack to use, several basic considerations have to be taken into account:

  • Desired storage density
  • Floor space and building height
  • Placement of building doors and columns
  • Inventory accessibility
  • Inventory rotation
  • Item/load size and weight
  • Optimal storage design
  • Cost of materials and installation

Work Benches Secaucus NJ

workbench is sturdy table at which manual work is done in Secaucus NJ. They range from simple flat surfaces to very complex designs that may be considered tools in themselves. Workbenches vary in size from tiny jewelers benches to the huge benches used by staircase makers. Almost all workbenches are rectangular in shape, often using the surface, corners and edges as flat/square and dimension standards. Design is as varied as type of work for which the benches are used but most share these attributes:

  • A comfortable height for working with provisions for seated or standing work
  • A way to fix the workpiece to the surface so that it may be worked with both hands
  • Provisions for mounting, storing and accessing tools

Workbenches are made from many different materials in Secaucus NJ including metal, wood, stone, and composites depending on the needs of the work.

Workbench types may be divided according to the particular work they are designed to accommodate:

Multi-purpose/portable Work Benches Secaucus NJ

These Secaucus NJ benches are small, light, collapsible, and typically have built in clamps. Epitomized by the Black & Decker Workmate, a bench invented and patented by Ron Hickman, they can be used for a wide range of manual work.

Woodworking Work Benches Secaucus NJ

May be used for general Secaucus NJ woodworking but may be specialized for joinery, cabinetmaking, patternmaking, stairbuilding, carving, carpentry or trim work. They are usually made from solid wood and have integral clamping mechanisms. See also: Workbench (woodworking)

Metalworking Work Benches Secaucus NJ

Metalworkers need Secaucus NJ benches built to handle grinding, welding, light casting and forging, and layout. Most of these benches include a metalworker's vise mounted to the top.

Gardening Work Benches Secaucus NJ

Gardener's Secaucus NJ benches must be resistant to moisture and dirt. They are used for potting, seeding, and grooming, and usually have built-in shelving and storage.

Electronics Work Benches Secaucus NJ

Formally a fixture in radio shacks, now used for assembly and repair of all sorts of electronic equipment including communication, computer, and home entertainment items in Secaucus NJ. These benches usually have sources of power built in, along with shelves and task lighting. The height of most electronics benches are set for a seated worker.

Software Work Benches Secaucus NJ

Software used the metaphor of a Secaucus NJ workbench for exposing file management and application launching functionality, like in the AmigaOS workbench, or for designing processes connecting data sources to operations and models.

General repair Work Benches Secaucus NJ

Almost all Secaucus NJ family farms have one of these. Also found in small engine repair shops. Used for sharpening, cleaning, lubricating, assembly/disassembly, and light metal work.

Laboratory work Work Benches Secaucus NJ

Utilized especially with the chemical and biological sciences in Secaucus NJ. Surfaces are typically made of an inert material like slate. Most of these benches have water and fuel sources built in or near at hand.

Art and sculpture Work Benches Secaucus NJ

These Secaucus NJ benches are most likely to be used in the round. They are designed so that the workpiece can be mounted firmly, usually from underneath, and accessed from all sides. Used by wood and stone carvers.

Jewelers and Watchmakers Work Benches Secaucus NJ

Purpose built Secaucus NJ benches which generally have a "bench pin" - a small wooden work surface protruding out towards the worker, allowing for working on small parts. In addition there is usually a tray or leather apron underneath to catch precious metal filings or dropped items. They are designed so that when the worker is seated the work is at or near eye level.

Fitting and assembling Work Benches Secaucus NJ

Used by Secaucus NJ machinistspipefitterselectricians, textile workers, handloaders, and piece workers, these benches usually have space for layout and built-in tools, jigs and measuring devices to facilitate the work.

Storage Cabinets Secaucus NJ

storage cabinet (sometimes referred to as a stationery cupboard in Secaucus NJ) is a large steel cabinet with shelves inside, used for storing a variety of items, often stationery or books or other office supplies. It may be used for a wide variety of other storage needs, including machine parts, hardware, or many other things; but offices are the location where they are most often found.

Such a cabinet is typically about 6 feet high (182.9 cm.), although some Secaucus NJ models are about 7 feet (213.4 cm.) high, and others around 4 feet (121.9 cm.) high, sometimes referred to as counter size. They are often 3 feet (91.4 cm.) wide, and 1.5 feet (45.7 cm.) deep. The 6-foot height and this width and depth are standard measurements for the most common models; even in countries where metric measurements are used for describing the dimensions, these dimensions are often exact multiples of feet or inches, presumably harking back to designs that were originally planned in exact numbers of feet or inches. Most of these standard dimensions are the same as with lockers, and the designs for the two types of cabinet appear to have a common ancestry; and indeed, stationery cabinets are usually manufactured by the same companies who produce lockers and filing cabinets.

Stationery Secaucus NJ cabinets come with three, four, or five steel shelves which are designed to fit across the width of the cabinet, fitted into brackets in the internal walls, and the position of these can be changed in small increments, thus allowing users to adjust the height of the shelves to their particular needs.

There are two doors at the front which swing outwards from the centre: to close and lock the cabinet, the left door is closed first, and then the right door, which interlocks with a flange on the edge of the left door, thus holding it in the closed position, and the cabinet may be locked by turning a key in a lock in the right door. For added security, this door is usually equipped with three-point locking. Unlike lockers, stationery cabinets are not usually sold with a padlocking option.

Wire Mesh Partitions Secaucus NJ

National Lockers and Shelving is also a national leader in wire mesh partitions. Designed to prohibit foot traffic, these tough Secaucus NJ partitions are available with the strength of 10-gauge wire, providing security and protection from break-ins and vandalism for many environments.

National Lockers and Shelving wire mesh product line includes both standard and custom panels, doors, service Secaucus NJ windows and corners designed to simplify partition arrangement in a variety of applications. Key uses include school equipment lockers, co-location facilities and multi-family building storage areas. Manufactured from 100% carbon-neutral, recycled steel, the product also qualifies for LEED points.

Welded wire mesh, or welded wire fabric, or "weldmesh" is an electric fusion welded prefabricated joined grid consisting of a series of parallel longitudinal wires with accurate spacing welded to cross wires at the required spacing.

Machines are used to produce the mesh with precise dimensional control. The product can result in considerable savings in time, labour and money.

folding screen is a type of free-standing furniture. It consists of several frames or panels, which are often connected by hinges or by other means. It can be made in a variety of designs and with different kinds of materials. Folding screens have many practical and decorative uses. It originated from ancient China, eventually spreading to East Asia, Europe, and other regions of the world.

Mezzanines Secaucus NJ

In architecture, a mezzanine or entresol is an intermediate floor between main floors of a Secaucus NJ building, and therefore typically not counted among the overall floors of a building. Often, a mezzanine has a low ceiling and projects in the form of a balcony. The term is also used for the lowest balcony in a theatre, or for the first few rows of seats in that balcony. The word mezzanine comes from the Italian word mezzano, meaning "middle".

The mezzanine floor often projects itself from the walls and does not completely close the view of the Secaucus NJ ceiling from the floor immediately below. In short, a mezzanine floor and the floor below it share the same ceiling. Mezzanine floors are often located between the ground floor and the floor above, but it is not unusual to have mezzanine floors in the upper floors of a building.

In Palladian architecture the mezzanine is a low upper floor, usually for Secaucus NJ servants and/or storage. In stadiums, the "mezzanine" level is a term often used for premium or "club level" seating, typically just a few rows deep and hanging from the upper tier, affording an unobstructed view of the playing field.

In transit stations, a mezzanine level is often encountered between the Secaucus NJ station's entry elevation and the platform level, where the service is boarded. This may contain the area where fares are paid, or provide access to different service platforms. The term is used particularly where an open concept of station allows the platforms to be viewed from that level.

Industrial Mezzanines Secaucus NJ

In industrial applications, Secaucus NJ mezzanine floor systems are semi-permanent floor systems typically installed within buildings, built between two permanent original stories. These structures are usually free standing and in most cases can be dismantled and relocated. Commercially sold mezzanine structures are generally constructed of three main materials; steel, aluminum, and fiberglass. The decking or flooring of a mezzanine will vary by application but is generally composed of b-deck underlayment and wood product finished floor or a heavy duty steel,Cement rods,aluminum or fiberglass grating.

The mezzanine is often used in Secaucus NJ shops and similar spaces for storage of tools or materials. The high roof of the shop is ideal for a mezzanine, and offices can be put either below or above it. Mezzanines are frequently used in industrial operations such as warehousing, distribution or manufacturing. These facilities have high ceilings, allowing unused space to be utilized within the vertical cube. Industrial mezzanine structures are typically either structural, roll formed, rack-supported, or shelf-supported, allowing high density storage within the mezzanine structure.

In-Plant Office Secaucus NJ

When Secaucus NJ office space is too costly, convert part of your warehouse into an office. With an in-plant office you can create very comfortable office space including windows, heat and air conditioning. Let us come in and design a space for your office needs.

We utilize the versatility of our Secaucus NJ wall systems to design the enclosure that best fits your needs. Sound control is one of our main concerns. Whether you are looking to provide a quiet environment for workers or conversely isolate a noisy or dangerous piece of equipment , our wall systems can accommodate.

Secaucus NJ Environmental controlis our other main concern. Our wall systems work seamlessly with HVAC equipment to control temperature and humidity for applications such as CMM rooms and additional air handlers for clean room applications. We also accommodate the most difficult environment, the outside elements, with our fully assembled booths.

What are the benefits of going modular?

1. Our products install cleaner and faster which equals less mess and less downtime compared with stick-built construction.
2. Our wall systems are nonprogressive in design so, once assembled, any panel section can be removed, replaced, or changed to a window or door with ease.
3. Modular construction is also open construction which allows building inspectors to check the structure and wiring at any point of the install process.
4. Modular construction also qualifies for Accelerated Depreciation through IRS §179 which saves some cost on the backend.

Why Inplant Offices?

1. We've been around since 1987 with most of our team bringing many years of Industry experience with them.
2. No job is too small or too large. From a single one-person shipping office to a multi-story complex, we've done it before and look forward to sharing that knowledge and experience on your project.
3. We partner with the best distributors in the country for personalized solutions including and beyond what we manufacture.

Are there standard sizes?

No. We price walls by the linear foot and deck/ceiling by the square foot. That being said, multiples of 4 (12x12, 12x16, etc.) are best for flexibility.

Can I store anything on the roof?

We can provide an integral load bearing roof up to 125# PSF in both 1-3/4" and 3" systems. Beyond that our products integrate easily with mezzanines as well.

How does the electrical work?

We typically furnish 4-bulb T8 lighting with wall switches, duplex outlets, and a load center. Wiring or conduit are by others unless we provide modular wiring. Outlets and light switches are mounted in our wiring studs and once above the ceiling line the wires can be run back to the load center. We provide cover plates to conceal the wiring in the studs. Wiring lights is no different from conventional construction. Our modular wiring consists of snap together connections with MC cable to link all the prewired lights and outlets back to a junction box in the ceiling near the load center. An electrician would bring power to the load center and extend wiring up to the junction box(es).

What about HVAC?

For most applications we use self-contained HVAC wall units which plug into adjacent dedicated outlets. For larger projects we can easily provide the extra plenum space for central air ductwork.

What about flooring?

A finished floor is not integral to the structure so any flooring options are available and can be installed after the fact. Two story structures are quoted with vinyl tile as the standard finished flooring for the upper level but carpet could easily be used instead.

What are the color choices?

Aluminum wall systems are anodized while steel is painted. Our vinyl covered panels come in three colors. FRP has few more options beyond that. Painted steel or gypsum can be painted any color. Steel wall systems are painted to match the panels and aluminum walls systems are all satin anodized.

Do I need to pull permits?

Every jurisdiction operates differently in regards to code compliance and enforcement. If permits are required we can provide stamped engineered drawings for an additional cost.

What is the lead time?

After we receive a purchase order we send out approval drawings which usually take a few days. After the drawings are approved our lead time is typically 3-5 weeks.

How do these ship?

A knocked down project is packed around the size of the panels so an 8 foot tall room would arrive on 4x8 skids, 9 foot tall is 4x9 etc. and arrive preferably in an enclosed trailer. A forktruck with a 3000 lbs capacity and extended forks is required. Our factory assembled booths ship assembled on a steel base with fork pockets. All of our products ship CLASS 70.

 

National Lockers and Shelving Navigation National Lockers and Shelving Home Page About National Lockers and Shelving National Lockers and Shelving Products National Lockers and Shelving Services Request a Quote or Catalog from National Lockers and Shelving Contact National Lockers and Shelving

Designed By: The Greene Touch, LLC www.WebPrintMore.com

Quality Used Lockers for Rent or Sale